background image

 

 

Long-term operation of 

compressor 

It is normal that refrigerator operates for longer time in   
summer when the ambient temperature is higher; 
Do not put too much food in the freezer at one time; 
Do not put foods until they are cooled; 
Frequent opening of refrigerator door. 

Illuminating light does not 

shine 

Whether the refrigerator is connected to power,   
whether the illuminating light is damaged.     

The refrigerator door can not 

be properly closed. 

The freezer door is stuck by food packages; 
Too much food; 
Tilt refrigerator. 

Loud noises 

Whether the food is leveled, whether the refrigerator is   
balanced; 
Whether the refrigerator parts are properly placed.     

7.1

 

Warm tips: 

The refrigerator enclosure may emit heat during operation specially in summer, this is caused 

by the radiation of the condenser, and it is a normal phenomenon. 

Condensation: condensation phenomenon will be detected on the exterior surface and door   

seals of the freezer when the ambient humidity is large, this is a normal phenomenon, and the   
condensation can be wiped away with a dry towel. 

Buzz:  Buzz  will  be  generated  by  running  compressor  specially  when  starting  up  or  shutting 

down. 
 
 
For  more  information,  please  contact  the  local  authority  or  your  retailer  where  you  purchased 
the product. 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for BC320BMF












Reviews: