41
Bell
fi res
English
Installation instructions
Outside appliance:
• Clean the outside of the appliance with a dry, lint-free cloth.
• Only when the appliance has cooled, it can be cleaned. Never use abrasive,
corrosive agents or fi replace cleaner.
• Any damage to paintwork can repaired with an aerosol BELLFIRES heat-
resistant paint. (Note that the appliance has suffi ciently cooled down !)
House ventilation:
• Make sure that the room where the appliance is installed has adequate
ventilation in accordance with applicable national and local standards.
• Avoid too much dust and particles of cigarette smoke, candles and oil lamps in
the air of your home. Heating of these particles through the convection system
of the appliance may lead to discoloration of walls and ceiling. Therefore, always
ventilate the room suffi ciently, where the appliance is installed.
Final check:
• Replace the door onto the appliance.
• Turn the power back on.
• Check the operation of the pilot burner, main burner, fl ame picture, convection
fan (option) and ambient lighting (option).
• Check for fl ue gas spillage above the door in the middle.
10 Minutes after the ignition of the main burner fl ue gas spillage is not allowed.
( See also 2.1.3, point 12)
9
General:
• Parts:
Individual parts for replacement or accessories are available from your
BELLFIRES-dealer. Use only original parts.
• Modifi cations:
Introduced modifi cations to the appliance are not permitted.
