22.7.3
Overview of the connections on the gas regulator block
B
A
C
M
D
E
G
F
H
L
K
J
I
Item
Description
A Pilot light pipe
Supplies gas to the pilot light burner
B Thermocouple
Detects if the pilot light is on
C Connector (nut-olive) Ø 4mm
Connects the pilot light gas pipe to the gas
regulator block
D Thermocouple interrupter
Interrupts the signal of the thermocouple, and
bypasses this signal through the receiver.
When the thermocouple signal is cut off by
the receiver (requested by the remote control)
or when the thermocouple signal is weak or
broken, the gas supply to the pilot light will
stop.
E Connector
Connects the gas valve of the rear burner
F Gas pipe rear burner
Supplies gas to the rear of the main burner
G Connector (nut-olive) Ø 8mm
Connects the rear burner gas line to the gas
valve of the rear burner
H Gas valve of the rear burner
Controls the flow of gas to the rear burner
I
Control cable of the gas valve of the rear
burner
Connects the valve to the receiver
J
Olive Ø 8mm
For the gas pipe to the front burner
K Nut Ø 8mm
For the gas pipe to the front burner
L
Gas supply connection
Inlet for the gas supply
M Gas pipe front burner
Supplies gas to the front of the main burner
Description
Smart Bell Panorama 45/59
13
Summary of Contents for Smart Bell Panorama 45/59 MF
Page 41: ...9 9 EU Declaration of Conformity EU Declaration of Conformity Smart Bell Panorama 45 59 41...
Page 42: ...EU Declaration of Conformity 4 42 Smart Bell Panorama 45 59...
Page 43: ...EU Declaration of Conformity Smart Bell Panorama 45 59 4 43...
Page 44: ...Y Your Bellfires dealer 001 18 12 2018 348161...
