18
Bell
fi res
English
Instructions for use
Setting the desired temperature
• Select the desired mode of operation or by pressing the
SET
button
briefl y.
• Press the
SET
button until the temperature indication on the display begins to fl ash.
• Set the temperature with (large fl ame) or (small fl ame).
• Wait or press the
OFF
button briefl y to go to
mode.
• If the temperature control in should be off (lower battery consumption),
decrease the night temperature until appears on the display.
Important:
Place the hand-held transmitter in a place that is not
infl uenced by direct sunlight, draught, heat from
the appliance and other heat sources.
Programming the timer: P1 and P2
• Select the desired mode of operation by pressing the
SET
button briefl y.
• Press the
SET
button until P1 (
ON
) (start heating period P1) and the time appear
in the display. (The time indication fl ashes.)
• Set the time for the beginning of the fi rst heating period by pressing (large fl ame)
for houre and (small fl ame) for minute’setting.
• Press the
SET
button briefl y; P1 (
OFF
) appears on the display. Set the time for the
end of the fi rst heating period.
• Press
SET
again to set the second heating period P2 (heat
ON
) and P2 (heat
OFF
).
• Wait a moment or press
OFF
to switch back to
mode.
AUX -symbol on the display
The AUX-symbol
on the hand-held transmitter’s display indicates that the “front
burner” and “rear burner” are both being operated. All functions apply to both burners
together.
If the AUX-symbol on the hand-held transmitter’s display is not visible, then the
“rear burner” is turned off and all functions only apply to the “front burner”
Summary of Contents for CORNER BELL MEDIUM 3 L/R CF/LF
Page 2: ......
Page 4: ...4 Bellfires English Instructions for use...