Bellfires CBL3 L/R CF, Instructions For Use & Manual Daily Maintenance, Page: 17 / 36

17
English
Instructions for use
ON
AM
PM
OFF
Hand-Held Transmitter One-Button Operation
(Default Setting)
• Press button until two short beeps and a
blinking series of lines confi rms the start
sequence has begun; release button.
• Main gas fl ows once pilot ignition is confi rmed.
• Hand-held transmitter automatically goes into
Manual Mode after main burner ignition.
Hand-Held Transmitter Two-Button Operation
• Press and button simultaneously until
two short beeps and a blinking series of lines
confi rms the start sequence has begun; release
buttons.
• Main gas fl ows once pilot ignition is confi rmed.
• Hand-held transmitter automatically goes into
Manual Mode after main burner ignition.
ON
AM
PM
OFF
Note
Change from one-button to two-button ignition operation by pressing
and holding button for 10 sec. immediately after installing batteries.
ON is displayed and 1 is fl ashing. When change is complete 1 will
change to 2 .
Note
Change from two-button to one-button ignition operation by pressing
and holding button for 10 sec. immediately after installing batteries.
ON is displayed and 2 is fl ashing. When change is complete 2 will
change to 1 .