9
Heater Control
Press the heater control to turn on and off the heater.
When the heater is turned on, press and hold the heater control button for 5 seconds to enter
temperature adjustment mode. The LED indicator is red. In adjustment mode, the display will
flashes. There are 22 levels to change Fahrenheit temperature (ON, 62°F - 82°F). After this is set,
the display will flash 5 times and exit from setting status.
To switch from degree Fahrenheit to degree Celsius, press and hold the power button for 5
seconds when the heater is turned on. The LED indicator will turn to green. There are 12 levels to
change Celsius temperature (ON, 17°C - 27°C). Repeat the same process to convert Celsius to
Fahrenheit.
NOTE: Degree Fahrenheit will be displayed in RED and degree Celsius will be displayed in Green.
Timer Control
Press the timer button to turn the timer on. The timer function can controls both the flame effect
and heater.
The timer can set as the table suggested below
Button Press
Timer Interval
Display
1st press
30 Minutes
30
2nd press
1 Hour
1h
3rd press
2 Hours
2h
4th press
3 Hours
3h
5th press
4 Hours
4h
6th press
5 Hours
5h
7th press
6 Hours
6h
8th press
OFF
None
NOTE: Timer only controls heater if only the heater is on before timer is set.
NOTE: Timer only controls flame effect function if only the flame effect function is on before timer
is set.
NOTE: Timer can control both heater and flame effect function if both are on before timer is set
