background image

7

• This appliance must be used on a non combustible surface.

• Keep at least 80” clearance space above and 36” around the

 bowl.

• LPG cylinder must be positioned at least 36” away from the

 bowl.

ASSEMBLY INSTRUCTION (Installation Location)

36”

36”

80”

• This appliance should only be used in a well-ventilated outdoor area.

• DO NOT use this appliance in an enclosed area such as building, tent, car, or home.

WARNING

Installation of this product must conform with local codes or, in the absence of local codes, with 

either the National Fuel Gas Code, ANSI Z223.1/NFPA 42, Natural Gas and Propane Installation 

Code, CSA B149.1 or Propane Storage and Handling Code, B149.2. or the Standard for 

Recreational Vehicles, ANSI A 119.2/NFPA 1192. and CSA Z240 RV series, Recreational Vehicle 

Code, as applicable.

NOTE to Installer: Leave this guide with the consumer. 

NOTE to consumer: Please retain this guide for future use.

• Improper installation, adjustment, alternation, service or maintenance can cause

property damage, personal injury, or death. Read and follow the installation,

operating and maintenance instruction throughly before installation or servicing this

equipment. Installation and service must be performed by a 

 installer, service 

agency, or the gas supplier.

WARNING

OFF

Summary of Contents for 014-HG-PS06













Reviews: