BellCount S715
USER'S MANUAL
Rev. 2015-12-21
Page 8 of 36
3 BellCount S715 Operation
3.1 Power
On/Off
How to switch on S715:
1.
Connect the power cable to S715 and the power outlet.
2.
Press the Power Switch button on the rear side of S715.
3.
After a short boot-up and self-test, S715 enters the main menu.
How to switch off S715:
1.
Make sure to save counting results, which you want to keep.
2.
Press the power switch button to turn the machine off.
3.2 How to Handle and Place Banknotes in S715
To count banknotes smoothly, please follow the following guidelines:
1.
Avoid counting wet, excessively dirty or spoiled notes.
2.
Check for foreign matters mixed with the notes, i.e.: paper chips, rubber bands, clips, dust, etc. which will jam the
note path or even damage the sensors.
3.
Remove folds or curls from the notes before placing them in the hopper.
4.
Align all the corners and edges of the notes, unevenness could cause errors.
5.
Put the notes in the centre of hopper and adjust the hopper guides if necessary.
