Page9
Page10
Instruction of Using Our Products
Precautions
1. The installation should be carried out by a qualified technician and creepage protector
should be installed in the place easily to be controlled.
2. The electronic parts should be well grounded, otherwise, the manufacturer will not be
liable for any loss or consequences occurred.
3. The load capability of the power supply should be considered during installation, or it
affects the normal operation of the product or may lead to accident!
4. For any functions can not be activated through the ways mentioned above, please
contact a certified technicians or local dealer.
5. If you don't use the product for a long time, please disconnect the main power supply.
6. Parts containing live parts, except parts supplied with safety extra-low voltage not
exceeding 12V, must be inaccessible to a person in the bath.
7. Earthed appliances must be permanently connected to fixed wiring.
8. Parts incorporating electrical components, except remote control devices, must be
located or fixed so that they cannot fall into the bath.
9. The appliance should be supplied through a residual current device (RCD) having a
rated residual operating current not exceeding 30mA.
10. Make sure that the wire is laid correctly.
11. Make sure that the equipotential connection is done correctly.
12. The means having a contact at least 3.0mm separation in all poles that provide full
disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
13. If the supply cord is damaged,it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
Earthing Marking
Equipotential
Switch Marking
Function Instruction
1. On/off
when power-up state, press any key the back lamp of the control panel is semi-light,
press ( ) to start the system, the back lamp is full light, all functions are open, the
screen issues blue light, and display the current temperature, repress to close all
functions.
2. Lamp
Press ( ) to turn on/off the lamp.
3. Ozone
Press ( ) to turn on/off the ozone.
4. Air pump
Press ( ) to turn on/off the air pump.
5. Water pump
Press ( ) to turn on/off the water pump when it is full of water.
When lack of water, press ( ), there water pump will not start and it displays ( ) on
the screen. When plenty of water is filled, the pump start and it displays ( ) on the
screen.
6. Heater
Press ( ) to turn on/off the heater when it is full of water. When lack of water, press
( ), the heat will not start, it displays ( ) on the screen. When plenty of water is
filled, the pump start and it displays ( ) on the screen.
7. Sound
when the system is startup, press ( ) the panel once start FM,the LCD displays
current frequency; when the FM is startup, hold down ( ) it will go up to search or
memory the channel automatically, press ( ) of the panel, the FM frequency shines,
repress ( ) or ( ) to search the channel up or down manually. When the frequency
stops shining, press ( ) for the second time, the FM frequency shines, repress ( )
or ( ) the search the channel up and down, the frequency range is 0-19. Press ( )
of the panel, the system changes to CD, it will display
CD
.
8. Adjustment of volume
When the sound is startup, press ( ) and then press ( ) or ( ) to adjust the
volume of the sound, the LCD screen displays 0db-15db.
9. Automatic lock
When the system is startup, if there is no operation within 3 minutes, the keys will be
locked by the system automatically, hold ( ) for a while then the keys can be unlocked
