background image

Dear Customer,

Thank you for choosing our product. For your safe concern, please take a few 
minutes to read this manual before installation and use.

WARNING

1. Ensure that the installation is in the correct zone and that equipotential bonding is 

    carried out.

2. The new hose-sets supplied with the appliance are to be used and that old hose-

    sets should not be reused. 

3. 

4. Pay attention to the drop height when go in or out of the appliance, to avoid 

    stumbling. Watch out the appliance with suds

5. Don't use acidic and strong alkaline detergent, acetone, ammonia and so on. 

    Clean with alkalescent detergent and soft cloth

6. Put on fluid sealant once it shed, to avoid water leakage.

7. Settings, configurations and details of the products are subject to be changed

    or upgraded without prior notice.

8. For the maintenance, please contact the technicians appointed by the dealer and 

    don't disassemble and fix by yourself, or the supplier will be free from any 

    consequences that may occur.

This appliance is not intended for use by persons with reduced physical, sensory 

    or mental capabilities, or lack of experience and knowledge (including children; 

    people with heart disease or high blood pressure), unless they have been given 

    supervision or instruction concerning use of the appliance by a person responsible 

    for their safety. Children should be supervised to ensure that they do not play with 

    the appliance. 

Preparations

02

01

Please use tools to open the packing;                     

Make sure all accessories are in the packing

Drain 1pcs

Handheld shower 
hose 1pcs

Accessory Box 

 Handheld shower 1pcs

Waterfall faucet 1pcs

Drain cover 1pcs

A: Gradient                     B:  Sealant                C: Adjustable spanner                D:  Thread sealing tape

Installation Tools(no included)

Summary of Contents for MT-IR1802







Reviews: