background image

 

                                                             

           

 

5

2) Automatic start function 

If you wish to set the coffee maker to make coffee at a pre-set time, for example now it is 5:10 pm, 
you want the coffee maker make coffee af 8:15pm, follow steps 1 to 5 of the above section, and 
then you can set the automatic start function as follows: 

Press “ON/OFF” twice, the “AUTO” indicator will be illuminated. 

Press “PROG” button, the “LCD” will display “CLOCK”. 

Set the current time by pressing the “HOUR” and “MIN”.(Fig.2) 

Note:

 The time cycle is 12 hours, every 12 hours, the “AM” and “PM” will 

transform once. 

Press “PROG” button, the “LCD” will display “TIMER”, then set the automatic 
start time by pressing the “HOUR” and “MIN”.(fig.3) 

At 8:15 in the evening the “AUTO” indicator will be will go out, and the “RUN” 
indicator will light. The appliance will start automatically. After brewing, you 
can replace the carafe on keeping warm plate. 

Note: If you leave the coffee maker unattended for 2 hours, the appliance will 
automatically shut off.   

 

3) CLEANING AND MAINTENANCE: 

CAUTION:

 Be sure to unplug this appliance before cleaning. To protect against electrical shock, 

do not immerse cord, plug or unit in water or liquid. After each use, always make sure plug is first 
removed from wall outlet. 

Clean the filter, carafe and carafe lid after each use in hot, sudsy water. 

Wipe the product’s exterior surface with a soft, damp cloth to remove stains. 

Water droplets may buildup in the area above the Filter and drip onto the product base during 
brewing. To control the dripping, wipe off the area with a clean, dry cloth after each use of the 
product. 

Use a damp cloth to gently wipe the keeping warm plate. Never use abrasive cleaner to clean it. 

 

4) CLEANING MINERAL DEPOSITS 

To keep your coffee maker operating efficiently, you should regularly clean away the mineral 
deposits left by the water according to the water quality in your area and the frequency of of the 
appliance.    Please follow these instructions: fill the carafe with one part of white vinegar and 
three parts of cold water, pour the water and vinegar mixture into the resevoir, do not use coffe 
grounds at this time.    Brew the water-vinegar solution per “operation instruction”, repeat with 
fresh water and vinegar until no yellowish liquid is produced.    After solution runs clear, flush the 
appliance by bewing fresh water several times until no odor of the vinegar remains. 

Fig.2

Fig.3

Fig.3

Summary of Contents for BELCMSS01








Reviews: