TWO-WAY RECORDING
Two-Way Recording allows you to record your conversation with another caller. Two-Way
Recording can be enabled during TALK mode while you are using the handset. Two-Way
Recording(s) is stored in Message (MSG) box.
1.
While in TALK mode, press and
hold
the PAGE / 2-WAY REC button of the base.
2.
Release the PAGE / 2-WAY REC button to end your Two-Way recording.
NOTE:
If memory is full, the unit will announce
“ Memory full.”
and Two-Way recording is
not possible. You can erase any or all the messages remotely after listening to them. Refer
to the REMOTE OPERATION section for more details.
Recording two-way conversations may be subjected to Local State and Federal laws and
regulations
VOX (VOICE ACTIVATED) DETECTION
During OGM, ICM or Memo
recording, the Excursion
®
36248 uses
VOX (voice activation) to
conserve message storage space. The conditions for theExcursion
®
36248 terminating a
recording are:
•
Continuous silence for seven seconds.
•
Seven seconds after the caller hangs up.
REMOTE OPERATION
Allows you to access most of the Excursion
®
36248 functions away from the base unit using
only the handset or any touch tone phone when you call the Excursion
®
36248. You can
play, review, repeat, skip, erase, and stop messages in the message boxes, record a Memo
or an OGM, set the Answer Mode ON or OFF, change your password, set the time and day,
activate the call screening function and the Voice Menu.
USING THE REMOTE OPERATION FUNCTION
There are Two-Ways of using Remote Operation:
1.
Handset (Remote Unit), or
2.
Calling the Excursion
®
36248 from a Tone Dialing Phone
A.
USING THE HANDSET
1.
Press the REMOTE button to activate the remote function.
2.
The handset and base unit IN USE LED indicator will blink.
B.
CALLING THE
EXCURSION
®
36248
FROM A TONE PHONE
NOTE :
The factory preset password for remote operation is
“#58”
.
1.
Call the Excursion
®
36248 from a tone dialing phone.
2.
While the OGM is playing or during ICM recording, enter # plus your 2 digits
password.
3.
After a successful password entry, the Remote Operation function is on.
Once you have activated the Remote Operation function either by handset or through a tone
dialing phone to call the Excursion
®
36248:
1. The Excursion
®
36248 will announce the total number of new message(s) in Message
(MSG) box.
2. The unit will prompt
“For help, press 9
.”
REMOTE COMMANDS
A. VOICE HELP MENU
Press
9
for Voice Help Menu. All remote commands can be entered during playback of the
menu. The following table shows the Voice Help Menu:
Key
Function
1
Change Password
