Bell BOLIK 50 US Manual For Use And Maintenance Download Page 19

19

D22000630 v.0 - UPD 260406

3.1 - General safety regulations

The machine must always be used by one operator only.

Do not use the machine outdoor when it is raining or snowing.

Nobody must be allowed to use the log splitter unless they have read the instruction manual and have been instructed in the regulations to
follow  for  correct  and  safe  use.

The machine must be used by adults only. Use of the log splitter by apprentices of not less than 16 years of age must be supervised by an adult
authorised to use the machine.

Never wear loose, unbuttoned clothing which may become trapped in moving parts.

Use a piece of cardboard or wood rather than the hands in order to search for eventual oil leakages.
Oil jets under pressure can penetrate under skin. In this case, see a doctor at once.

Do not move the log splitter while the motor is running.

Do not work on sloping or slippery ground. Position the machine in a flat area and ensure that the operator’s work space is free of objects which
may impede the freedom of movement of the operator.

Keep the log support bench free of waste materials (3 in fig.1) and ensure that the operator’s work space is free of obstacles: logs, chippings,
sawdust,  etc.

Check that the logs to be split are free from nails or wire, which may fly up or damage the machine. the ends of the logs must be cut square.
branches must be cut off flush with the trunk.

Never try to split logs larger than those indicated in fig.2, page 2. This could be dangerous and may damage the machine.

Break wood in the direction of the grain. do not place wood across the log splitter and leave it in that position for splitting; it may be dangerous
and may seriously damage the machine.

Never attempt to cut two logs at once; one may fly up and hit you.

If the log moves away from the blade, retract the ram or the blade and turn the log through 90°.

Do not attempt to load the log in the log splitter while the ram is in motion. you could get trapped and injured.

Keep your hands well away from any splits and cracks which open in the log; these may close suddenly and crush or amputate your fingers.

Never leave the machine unattended while it is running. If you leave the machine, even for a short time, remove the power supply or any
possible  cause  of  accidental  start-up.

The log splitter must never be used by an operator who is under the influence of alcohol, drugs, medicines, or who is tired. A clear mind is
essential  for  safety.

Never try to release a jammed log while the machine is running. The machine must be switched off during this operation.

Never request the assistance of another person to help you remove a jammed log.

Do not use machines if natural gas, petrol fumes or other inflammable vapours are present.

Check that the electric circuit to which the machine will be connected is suitable

.

 Power, voltage and frequency of the motor must

be checked (verify the nameplate on the motor and the data in this manual). The machine must be connected to a circuit with a regulation

differential  switch  upstream  and,  in  compliance  with  the  norms 

(30  mA  rated  fault  current)

,  with  a  ground  connection.

Use cables with a section of 2.5 mm2. Avoid use of free and inadequately insulated connections. Connections must be made with protected
material suitable for outdoor use. 

Do not use cable extensions longer than 5 mt.: too long cables or cables with inadequate

section may cause voltage drops and don’t allow the motor to develop all the power.

Always check the cable extension for any damage before using it.

Never open the pushbutton box on the motor. Should this be necessary, contact a qualified electrician.

Make sure that the machine and the cable never come in contact with water.

Treat the power cable with care. do not attempt to move the machine by pulling the cable. do not yank the cable to unplug it; keep the cable away
from excessive heat, oil and sharp objects.

Never  leave  the  machine  unattended  with  the  power  supply  “on”. After  use,  always  switch  the  machine  off  and  disconnect  it  from  the
power  supply,  especially  when  any  maintenance  work  is  required.

Do not use alcohol, petrol, or solvents to clean the machine. This could cause the safety information applied to the machine itself to become
illegible.

3 - SAFETY

The  information  given  in  the  chapter  is  extremely  important  for  safety  purposes.  It  describes  possible  hazards  tied  to  use  of  the

machine  and  instructions  for  correct  use  of  this  to  avoid  injury  or  damage.

WARNING

: The BELL Mod. BOLIK log splitter has been designed and manufactured to split logs of the sizes recommended on page 2, fig.2 only.

Use  of  the  machine  for  any  other  purpose  shall  be  considered  improper  and  the  manufacturer  shall  not  be  liable  for  any  injuries

or  damage  to  be  ascribed  to  improper  use  of  the  machine.

The operator must work in the position shown in fig.1 on page 2 (pos.11) only and operate the machine drive control with both hands without using

other improvised systems and without tampering with the controls

.

When the machine is working, persons and animals must be kept at a distance of at least 5 meters from the machine.

For the best and safest use, the log splitter should be used on a raised surface of height between 35 and 40 cm.

NEVER ATTEMPT TO TAMPER WITH THE PROTECTIONS OF THE LOG SPLITTER OR TO OPERATE THE MACHINE WITHOUT THESE. FAILURE

TO COMPLY WITH THE INSTRUCTIONS GIVEN IN THIS CHAPTER MAY RESULT IN SERIOUS INJURY OR DAMAGE TO PERSONS, THINGS AND

TO THE MACHINE.

ENGLISH

Summary of Contents for BOLIK 50 US

















































Reviews: