Bell BE-70PS Owner's, Owner'S Manual

Page: 18 / 25

19
- 19 -
OPERATION - continued
Using Chain Dialing
Chain dialing allows you to dial a variety of numbers that have been previ-
ously stored into memory locations, in any combination.
1. Lift the handset or press the SPK button.
2. When dial tone is heard, press the memory button that contains the num-
ber that you desire to dial.
3. Wait to hear the long distance access confirmation. Press another memory
location or use the keypad to enter the rest of the telephone number that
you wish to dial.
Caller-ID Display Information
When a telephone call is received, the Caller-ID information will be displayed
between the first and second ring. If you answer the call before the second
ring, information will not be displayed.
1. When a call is received, the caller’s name and number will be displayed if
available along with the time and date of the call.
2. If the caller's name or number is blocked by the sender, their name or num-
ber will not appear on the display. The display will indicate "BLOCKED
CALL" .
3. If the call is from out of your area code,
"OUT OF AREA"
will appear on
the display.
I 2 3 - 5 5 5 - I 3 I 3
I 2 3 - 5 5 5 - I 3 I 3 I 2 3 - 5 5 5 - I 3 I 3
I 2 3 - 5 5 5 - I 3 I 3
I0:40
I0:40 I0:40
I0:40
AM
2/08 3
2/08 3 2/08 3
2/08 3
JOHN SMITH
CALL #
NEW
REPEAT
BLOCKED CALL
I0:40 I0:40 I0:40 I0:40
AM
2/08 3 2/08 3 2/08 3 2/08 3
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-OUT OF AREA-
I0:40
I0:40 I0:40
I0:40
AM
2/08 3
2/08 3 2/08 3
2/08 3
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -