INSTRUCTIONS
FOR SET UP
3. Take the main central pole through the door ensure
that the rubber stoppers insert into the top and bottom
parts of the central pole. Find the middle point of the
cone and insert the pole so that the tent stands vertically.
Make the central pole stand vertical in the centre of the
groundsheet.
4. Place the A-Frame pole inside the door, attach it with
the canvas and eyelet hole, install one rainproof cap
outside the tent. Then ensure that the foot of the A-frame
is in the feet positions on the groundsheet. Be careful not
to rip the canvas with the A-frame spike.
5. Zip the door, attach the top door strap with the long
guy line and peg it down. Then, attach the rest of the guy
lines around the tent following the previous o clock
strategy that we used when inserting the pin pegs. Do not
put too much tension on the guy ropes at this point. Be
sure to follow the seam lines direction when placing the
guy lines to give a neat and even finish. The
aim is to set up your tent to look smooth overall like a
nicely ironed shirt. Creases will appear in the canvas if
the guy lines do not align with the natural stitch lines in
the seams.
Summary of Contents for BTV
Page 1: ...BTV INSTRUCTION MANUAL ...
