background image

 

 

39285 English I/B ver. 11182A-1

  

11182A-1 

                                                                                                             

              1

 

 
 
 
 
 
 
 
 
 

OWNER’S MANUAL 

#

  39285

 

ver. 

11182A-1

 

Page : 1             ENGLISH VERSION

 

 

IMPORTANT SERVICE INFORMATION 

 

Read this manual before attempting to setup or use this instrument. It contains important 
information regarding safe installation and use.  Keep this manual for future reference.  
Also save the carton, packing and proof of purchase to simplify and accelerate any needed 
action.  If you need assistance or service, call (800) 888-8990 between 8:00 a.m. and 4:30 
p.m. Pacific Standard Time, Monday through Friday.  You can also visit our web site at: 
http://www.nwbphones.com for technical support and information on our other products. 
 

  

WARNING

 

To prevent fire or shock hazard, do not expose this product to rain or any type of excess 
moisture. If accidentally dropped into water, the AC adaptor should immediately be 
unplugged from the wall along with the telephone line cord. 
 

 
 

 

 

 

 

 

 

 

 

 

 

THIS SYMBOL IS INTENDED TO ALERT THE USER OF    

 

THE PRESENCE OF IMPORTANT OPERATING AND 

 

MAINTENANCE (SERVICING) INSTRUCTIONS IN THE 

 OWNER'S 

MANUAL

.  

 

 

 

EXCURSION

 

39285

 

  
 

CARTON CONTENTS 

 

 

 

 

 

  Excursion

®

 39285 Base and Handset 

 

 
 

 

 

 

  Rechargeable Ni-Cd Battery Pack 

 
 

 

 

 

  Telephone Line Cord (Short and Long) 

 
 

 

 

 

  AC Adaptor  (9VDC, 350 mA, Center Positive) 

 
 

 

 

 

  User’s Manual 

 
 

 

 

 

  Warranty Card 

 
 

 

 

 

  Accessory Order Form 

 
 

 

 

 

  Wall Mount Screws and Hardware 

 

 

 

 

  

Summary of Contents for EXCURSION 39285


















Reviews: