36240 English I/B version 11259B-1
11259B-1 10
OWNER
＿
＿
S MANUAL#
36240
VER. 11259B-1
PAGE:
10
English Canadian Version
MOUNTING POSITION
DESKTOP USE:
Connect the telephone line cord to the TEL
LINE
jack on the rear of the base unit and connect
the
opposite end to the telephone modular jack.
(Figure 3
WALL USE :
A. WITH A STANDARD AT&T OR GTE MODULAR WALL JACK
1. Install the wall mount bracket at the position as shown in Figure 4.
1. Connect the short telephone line cord to the TEL LINE jack on rear of the base
unit.
2. Connect the opposite end of the telephone line cord to the modular wall jack.
3. Align the wall mounting slots with the studs located on the modular wall plate and
slide the base down to lock in place.
(Figure 4)
NOTE:
If you do not have a standard modular wall jack, find a qualified technician to
mount one on the wall.
B. WALL MOUNTING (No Standard Wall Jack)
1. Drill two holes with a vertical distance between the two marked
positions of 3
15/16”
(100 mm) as shown in Figure 5.
2. Drive a screw into each of the holes. Tighten them to the end
of the screw line, only leaving the smooth part of the screw
head outside the wall.
3. Hang the unit onto the screws, then slide it down firmly to
fasten the base
Base Unit
(Side view)
Wall Mount
Bracket
Wall Mouting
Solts
Telehone
Modular Wall
Jack
Studs
