BELL LABS INNOVATIONS Lucent Technologies INTUITY CONVERSANT MAP/100 System Installation Download Page 137

Page: 137 / 148

INTUITY CONVERSANT System Version 6.0
MAP/100 New System Installation

585-310-176

Issue 3.0

June 1997

Cable Connectivity

Page D-13

Making a Direct Connection from the Lucent I

NTUITY

Multi-port Card to a 615

Making a Direct Connection from the
Lucent I

NTUITY

Multi-port Card to a

615 Terminal or Other DTE Devices

Use the following procedure and

Figure D-10

to make these cable connections:

1. Attach the 14-foot (4.3-meter) modular cable (provided with the card) to

the Multi-port Serial card.

2. Attach the other end of the 14-foot (4.3-meter) modular cable (provided

with the Multi-port card) to the DTE adapter.

3. Connect the DTE adapter to the NULL modem.

NOTE:

The NULL modem must be provided locally.

4. Connect an RS-232 cable to the NULL modem.

5. Connect the other end of the RS-232 cable to a 615 terminal or other DTE

device.

Summary of Contents for Lucent Technologies INTUITY CONVERSANT MAP/100





















































































































































Search results

Summary of Contents for Lucent Technologies INTUITY CONVERSANT MAP/100

Reviews:

Brands by name

Popular brands

BELL LABS INNOVATIONS Lucent Technologies INTUITY CONVERSANT MAP/100, System Installation

Search results

Summary of Contents for Lucent Technologies INTUITY CONVERSANT MAP/100

Reviews:

Brands by name

Popular brands