SPECIFICATIONS:
• 120V, 60Hz, 800mA, 60W
• 90 degree adjustable panels
• 4000 Lumens
• 144 High Intensity LED Bulbs
• Suitable for E26/E27 Light socket base
Screw the TriBurst counterclockwise if the
light socket is facing downward (ceiling).
Screw it in clockwise if light socket is facing
outward (wall) or upward. DO NOT OVERTIGHTEN.
Turn the TriBurst ON/OFF using the light
switch for that socket.
2
Adjust the LED panels to the desired
position. Panels move up/down.
3
THE LED’s ARE NON REPLACEABLE.
FOR INDOOR USE ONLY
1
2
3
1
INSTALLATION
No tools required.
Turn the power OFF using the light switch for that socket before installing the lamp.
ÉTEINDRE en utilisant l'interrupteur appartenant à cette prise avant d'installer la lampe.
Remove the protective cap.
SPÉCIFICATIONS :
• 120V 60Hz 800mA 60W
• Panneaux ajustables à 90 degrés
• 4000 lumens
• 144 ampoules DEL à haute intensité
• Convient à une base de douille E26/E27
Retirez le bouchon protecteur.
Si la douille de la lumière est face vers le bas
(plafond) vissez TriBurst dans le sens anti horaire.
Si la douille est face à l'extérieur (mur) ou vers
le haut, vissez dans le sens horaire.
NE PAS VISSER TROP SERRÉ.
Pour ALLUMER/ÉTEINDRE TriBurst, utilisez
l'interrupteur appartenant à cette prise.
Ajustez les panneaux DEL à la
position désirée. Les panneaux
bougent vers le haut et le bas.
INSTALLATION
Aucun outil requis.
FCC STATEMENT
WARNING: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT SAFEGUARDS:
• DUE TO TRIBURST HIGH INTENSITY LED BULBS, DO NOT STARE DIRECTLY INTO THE LED LIGHT.
• RISK OF ELECTRIC SHOCK - USE IN DRY LOCATION ONLY.
• SWITCH OFF THE POWER BEFORE INSTALLING THE LIGHT.
• USE IN OPEN LUMINAIRE ONLY.
• DO NOT USE WITH DIMMERS.
• DO NOT PLACE OBJECTS NEAR THE LIGHT.
• ADDED WEIGHT OF THE DEVICE MAY CAUSE INSTABILITY OF A FREE STANDING
PORTABLE LUMINAIRE.
• THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS.