Bell and Howell BHDPF101, User Manual

Page: 4 / 20

4
1. Power Button
The frame will power on automatically when connected to a power source. Press and hold the
power button for three seconds to access the power menu. From there you can turn the frame
off or reboot it. Press and hold the power button for three seconds to turn the frame back on.
2. Reset Pinhole
Use a pin or needle to push the rest button if needed.
3. Micro USB
Connect a compatible mass storage device to upload photos to your frame.
4. MicroSD Card Slot
Insert a MicroSD memory card into this slot to upload photos or backup the frame. The memory
card can only be inserted one way, do not force the card in if it does not go in smoothly. To eject
the card simply push it in and it will pop out.
5. DC Jack
The power adapter plugs into this port.
6. Security Lanyard Port
Connect a security lanyard (not included) into this opening.
7. Stand
Your frame can be oriented in either portrait or landscape. To switch positions, simply slide the
stand towards the outer edge of the frame, in the direction of the arrows printed on the stand.
Then insert it into the desired opening and slide the stand towards the middle of the frame to
lock it.
8. Keyhole Mounting Ports
Your frame can be easily mounted on a wall using a mounting nail.