Charging your BH50
Simply plug the included USB cord into the USB
port at the base of the speaker. Once plugged
in, the LED will illuminate RED. It will turn off
once the internal battery is fully charged
.
Preserving the Waterproof Seal
Ensure that the side compartment door is fully
pushed in. This will prevent any dust and
moisture from entering the USB and AUX ports.
Factory Reset
If you are experiencing connectivity issues, you
may need to perform a hard reset on your BH50.
To do so,
press the handsfree button for four
seconds. An audible tone will sound, followed
by the LED flashing blue. Once reset
successfully, the LED indicator will flash every
second and will enter pairing mode
.
Specifications
Bluetooth Version: 4.0
Built-in Lithium-Ion Battery: 3.7V, 2600mAh
Charging Voltage: 5V
Speaker: 4
5mm 4Ω 5W x2
Frequency: 120Hz-18KHz
Distortion: ≤0.1%
Effective Distance: 10M
Waterproof Grade: IPX5
Summary of Contents for BH50
Page 1: ......
