Bell and Howell 2000 FB, User Manual

Page: 12 / 71

1
1. Introduction
Features
This section describes the features of this scanner.
Ultra-fast scanning
When scanning A4
K
(8½”
×
11”
K
), monochrome at 200dpi, this scanner can scan 55 (57)
pages/minute. When scanning A4
K
(8½”
×
11”
K
), monochrome at 400dpi, this scanner can
scan 31 (32) pages/minute. During double-sided scanning, when scanning A4
K
(8½”
×
11”
K
),
monochrome at 200dpi, this scanner can scan 81 (84) pages/minute.
* When using the Auto Document Feeder (ADF) in binary scanning, these speeds apply to
the second and subsequent sheets.
Simultaneous scanning of both sides of a document (Duplex
Model only)
If a document consists of individual, separate sheets, both sides of each sheet can be scanned
simultaneously. This capability eliminates the bother of having to flip document sheets over.
Direct operation using the buttons on the scanner
(Manual Scanning function)
If using a driver that supports the Manual Scanning function, scanning can be initiated by
pressing the
{
Start
}
button on the scanner. This function is useful when scanning a document
that needs to be set in place for each scan.
Large 150-sheet paper capacity
Up to 150 sheets* can be placed in the scanner’s Auto Document Feeder (ADF).
* A4 (64g/m
2
) or 8½”
×
11” (20lb)
Printing on scanned documents (optional)
The Endorser Unit Type A is provided as an optional mechanism that prints a symbol or the
number of documents that have been scanned by the Auto Document Feeder (ADF). This
capability is useful for referencing scanned data or confirming that a document has been scanned.