11
10
Installing and Setting up the Card
11
10
Installing and Setting up the Card
2.6
Now secure the Card with the screw that you previously placed
in a safe place.
2.7
Carefully screw the antenna onto the threaded connector on the
Card. Turn the antenna until it is vertical and pointing up.
2.8
Replace the computer’s cover. Now that the Card is installed, you
can reconnect the power cord, and turn it back on.
2.9
After restarting, the wizard will
prompt you to install software
for the Card. Click the “Install
the software automatically
(Recommended)” option.
2.10
Hardware installation is now
complete. Click “Finish” to close
the wizard.
Installation is now complete.