6/16/2017
Knowledge Article
http://belkin.force.com/Articles/articles/en_US/Troubleshooting_and_Tutorials/9342/p?pubstatus=o#Electrical
5/14
Step 8:
Turn the power back
ON
at your circuit breaker.
QUICK TIP:
To verify that the Wemo Light Switch has been successfully
installed to your electrical line, manually switch it
ON
.
You have now installed the Wemo Light Switch to your electrical line.
Wemo App and Wemo Light Switch Setup
Before setting up the
Wemo Light Switch
with the Wemo App, make sure you have the
following:
A Wemo Light Switch that is already installed to your electrical line and is
functioning.
Active WiFi and internet connection.
The
WiFi name (SSID)
and
password
of your router. To know how to get them,
click
here
.
An iOs 9.0 device or higher; or an Android™ 4.4 device or higher.
Once these requirements are complete, proceed with the instructions below.
Step 1:
Download and install the Wemo App on your mobile device from
the
App Store
®
if you are using an iOS device or from the
Google Play™
Store
if you are using an Android™ device.
Step 2:
Enable the WiFi feature of your mobile device and make sure it
is connected to your WiFi. This is required to ensure
no error
is
encountered upon installation.
NOTE:
If you have a dualband router, Wemo can only connect to your
2.4 GHz band.
