8
1
2
3
4
5
6
Installation
8
Connect the Hardware
1.
Place the Hub no more than three feet from the dongle.
2.
Power OFF the Hub and disconnect it from all USB
devices (e.g., cameras, hard drives, scanners).
3.
Connect the external antenna and the power supply to
the Hub.
4.
Ensure that the dongle and Hub are facing each other.
5.
Connect the dongle to the PC’s high-speed USB
port. The system will automatically detect and begin
installation of the drivers for the connected dongle
using the Found New Hardware Wizard.
Proceed as follows:
Figure 3: Found New Hardware Wizard
1.
Select “No, not this time”, and click “Next”.
8
