11
gETTing sTaRTED
Using the WPs button
1 . Start WPS Push Button Connection (WPS PBC) on your
computer or other Wi-Fi device that you would like to connect
wirelessly to your Router . Often there will be a button for this
purpose in software that came with the device, or a physical
“WPS,” “PBC,” or “Security” button on the device itself .
2 . Within two minutes, press the WPS button on
your Router and hold for two seconds .
The WPS light (small light above WPS button) will blink blue while it
listens for your Wi-Fi device . Once a connection is established, the
light will turn blue and then go out . If a connection is not established,
the light will blink amber . You may repeat the process to try again .
You can repeat this process for each WPS-enabled
device you’d like to add to your network .
