F5D8011_v3000 manual - revised by JOy Page 25 of 43
To start using security, you need to first enable WEP or WPA for your wireless
router (or access point). For Belkin Wireless Routers (or Access Points), these
security features can be configured by using the web-based interface. See your
wireless router’s (or access point’s) manual for directions on how to access the
management interface.
IMPORTANT: You must now set all wireless network cards/adapters to match these
settings.
Configuring your Card to use Security
At this point, you should already have your wireless router (or access point) set to use WPA or
WEP. In order for you to gain wireless connection, you will need to set your N1 Wireless
Notebook Card to use the same security settings.
Changing the Wireless Security Settings
The Belkin N1 Wireless Notebook Card supports the latest WPA security feature as well as the
legacy WEP security standard. By default, wireless security is disabled.
To enable security, you will first need to determine which standard is used by the router (or
access point). (See your wireless router’s or access point’s manual for directions on how to
access the security settings.)
[insert 8011_WNU_My_Connections.tif]