Belkin LineCast Auto FM, User Manual

Page: 5 / 15

3
LineCast Auto FM
sections
table of contents
1
3 5
4
6
InITIAL seTUp
2
1� Insert the power plug into your car’s 12V power outlet (also known
as the cigarette lighter). The light ring around the multi-function
button will turn on in orange.
2� Press the ClearScan button on top of the product to find an FM
frequency that’s clear.*
3� Store that frequency in memory by pressing and holding one of the
two MEM buttons. When the frequency is stored successfully, the
product will beep and MEMORY 1 or MEMORY 2 will show on the
display.
4� Turn on your car stereo and set the input source to FM.
5� Tune your car stereo so that its FM frequency matches the
LineCast Auto FM.
6� If possible, store the frequency in one of your car stereo’s preset
buttons. Typically this is done by pressing and holding the chosen
preset button until the stereo beeps or gives some indication that
the frequency has been stored.
7� Insert the product’s audio cable into the headphone jack of your
phone.
*If you hear static as you travel from one part of town to another,
press the Clearscan button again to find a better frequency�
Optimal
Acceptable
Avoid
Mount Button Power Aux 3.5mm
Audio Cable
Aux 3.5mm Audio
Extension cable
Phone 3.5mm
Audio Cable