Belkin F9K1102V2, User Manual

Page: 14 / 38

your disk has an optional power supply, please use it while the disk is attached to your
Router.
Adding a Printer
You can add a printer to your network via your Router’s USB port.
Once connected, you can print from various computers and
wireless devices within your network.
Plug your printer’s USB cable into the USB port located on the back
of your Router. When the light above the USB port is lit, your
printer is available to computers on your network.
You can manually check the status of your printer by visiting the
USB Print and Storage Manager, found under the Belkin Router
Manager icon displayed in your system tray (Windows) or menu
bar (Mac). If you have difficulty sharing a printer on your network,
please see the “Troubleshooting” section of this manual.
Note: Each computer that will use the printer must have both the
Belkin software and the printer’s driver installed. If the print
driver is not installed, you will be asked to install it by the Belkin
USB Print and Storage Manager.
Adding Other USB Devices
Other USB devices may also be shared via your Router. Plug your
device into the USB port located on the back of your Router. When
the light above the USB port is lit, your device is available to
computers on your network.
Computers running the Belkin USB Print and Storage Manager will
be able to make use of the shared device by visiting the USB Print
and Storage Manager, found under the Belkin Router Manager icon
displayed in your system tray (Windows) or menu bar (Mac).
Bundled Software
USB Print and Storage Manager
The USB Print and Storage Manager helps to manage and monitor
the use of your USB printers, scanners, hard drives, and other