TuneCast
®
Auto for iPhone and iPod
4
sections
1
2
7
6
5
4
table of contents
3
seleCTInG An fM fReqUenCY
Manually selecting an fM frequency
If you want to use a specific frequency, you can manually select it on your TuneCast Auto
1�
Tune your stereo to a frequency between
stations The ideal frequency is one not
broadcasting a radio station’s signal
2�
Press the + or - button on your TuneCast
Auto to select the same frequency
storing and selecting a frequency
You can store two frequencies using the
“m1” and “m2” buttons
1�
To store a frequency, select the desired
frequency on your TuneCast Auto using
the + or - buttons Press and hold the
“m1” or “m2” preset button for two
seconds The “m1” or “m2” icon will flash
on the screen when the frequency is set
2�
To recall a preset frequency, press
the “m1” or “m2” preset button Your
TuneCast Auto will change to the preset
frequency
1.
Find a frequency without a station on it.
A good frequency will be between other
stations, with a lot of static.
2.
Match station using the (+)
and (-) buttons.
3�
To identify the best available frequencies
in your area, visit wwwbelkincom/
mybestfm
