TuneBase
™
FM for iPhone and iPod
9
sections
1
2
3
8
7
6
4
table of contents
5
BasIc conTrols
Manually selecting an FM Frequency
If you want to use a specific frequency, you
can manually select it on your TuneBase FM
1�
Tune your stereo to a frequency with
a weak signal If possible, try to find a
frequency that is not broadcasting a
radio station
2�
Press the + or - button on your TuneBase
FM to select the same frequency
Pressing and holding either button will
provide faster tuning
storing a Preset Frequency
When you find a clear FM frequency, you can
store it for later use You can store two radio
frequencies using the 1 and 2 preset buttons
1�
If you are not currently on the frequency
you want to store, use the + or - buttons
to select the frequency
2�
Press and hold the 1 or 2 preset button
for two seconds You will hear a beep
when the new frequency is programmed
