Belkin F8Z076, User Manual, Page: 4 / 12

STEP 1 - SportCommand Receiver Setup
Power on your iPod. Then, plug the SportCommand Receiver
into the bottom of the iPod (Fig. 1). The Receiver powers
on automatically. Once the unit is on, we recommend
engaging the hold switch on the iPod to prevent accidental
button presses.
Note: The SportCommand Receiver can be used whether or not you use an iPod case.
STEP 2 - SportCommand Remote Setup
1.
Turn your Remote with the buttons facing up. Using
a coin or something similar, turn the battery door
counterclockwise and gently remove from the Remote
(Fig. 2).
2. Insert the battery with the (+) side facing up (Fig. 3) and
gently screw the battery door back into place. There are
graphics on the Remote that indicate when the battery
door is in the locked position.
3. Now press any of the Remote’s buttons for the
SportCommand Remote and Receiver to pair up. The
green light on the Remote will blink when the first
button-press command from the Remote reaches the
Receiver correctly.
Fig. 1
Fig. 2
Fig. 3
Setup Instructions