22
Bluetooth Network Access server and a Bluetooth Network Access client at the same time.
3.6.8.1 Setup for Windows 98 SE & Windows Me
NOTE: Internet protocol routing software is required on Windows 98 SE and Windows Me
servers.
Install and configure the routing software as instructed by the software’s manufacturer.
Configure the server:
1. From the Windows Control Panel, double-click the Network icon.
2. On the Configuration tab, select “TCP/IP-> Bluetooth LAN Access Server Driver” (scroll down if
necessary).
3. Click “Properties” and select the IP Address tab.
4. Select “Specify an IP address”.
5. Enter an IP Address (suggested value—192.168.1.1).
6. Enter a Subnet Mask (suggested value—255.255.255.0).
7. Click “OK” twice to close the dialog boxes and then click “YES” to restart the computer.
3.6.8.2 Setup for Windows 2000 and Windows XP
If Internet Connection sharing was previously enabled (before BTW was installed), it must be
disabled and then re-enabled before the Bluetooth network adapter can use it. See section 5.8 for
more information.
1. From the Windows system tray, right-click the Bluetooth icon and select “Advanced
Configuration” from the shortcut menu.
2. In the Bluetooth configuration panel, select the Local Services tab, “Network Access” and then
click “Properties....”.
3. From the Network Access, General properties page, in the “Type of service” shortcut menu, select
“Allow other devices to access the Internet/LAN via this computer”, and then click “Configure
Connection Sharing”.
4. Right-click “Local Area Connection”, select “Properties” and then select the Sharing tab.
5. Select “Enable Internet Connection Sharing” for this connection, click “OK”, and then click “YES”
in the confirmation dialog box.
3.6.9 PIM Item Transfer
Overview
The PIM Item Transfer service allows Personal Information Manager items to be transferred
between this computer and a remote Bluetooth device.
Four data types are supported:
•
Business Cards
•
Calendar Items
•
E-mail Messages
•
Notes
Each data type can be saved in any of the supported and installed PIMs.
NOTE: PIMs that are not installed on this computer will not appear in the shortcut menus.
When the PIM that is associated with an individual data type is changed on the PIM Item Transfer
page, that data type is also changed for the PIM Synchronization service.
Configure
In addition to the configuration options common to all Bluetooth services, this service also has
settings that determine: