21
TrOUblesHOOTInG and faQs
What do the leds on the receiver mean?
Most of the information you need will appear on the
TV screen, but here’s a short list of what the LED light
on the transmitter and receiver can tell you.
Connectivity
How long will it take for my ScreenCast AV
system to “wake up” and connect?
• When turning on the receiver and transmitter, it can take up
to 15 seconds for the devices to connect with one another.
• If you change sources or video resolution, you
may experience up to 10 seconds of connection
time as the devices sync with one another.
• If you are adding an additional transmitter to your ScreenCast
AV system, it can take up to 60 seconds to pair.
note: The ScreenCast AV system comes with the receiver and
transmitter pre-paired so this should not be necessary
unless you add an additional WHDI
™
transmitter
or press the reset button long enough to reset the
receiver to factory defaults (5 seconds or more).
When your
ScreenCast unit is…
The light will be…
Starting up
Slowly blinking blue
Establishing a
connection
Rapidly blinking blue until the
connection is made. If the connection
cannot be made after one minute, the
light will blink amber to show that a
connection failure has occurred.
Connected with good
signal strength
Solid blue
Connected with poor
signal strength
Solid amber
Receiving input from
the remote control
The light will rapidly turn on and off
until the remote button is released.
