35
table of contents
1
2
3
6
5
SectioN
4
Double N+ Wireless USB Adapter
USiNG tHe BelKiN WiReleSS NetWoRKiNG UtilitY
WeP Setup
64-Bit WeP encryption
1 . Select “WeP” from the “Data encryption” drop-down menu .
2 . After selecting your WeP encryption mode, you can enter your key
by typing in the hex key manually.
A hex (hexadecimal) key is a combination of numbers and
letters from A–F and 0–9. For 64-bit WEP, you must enter 10 hex
characters .
For instance:
AF 0F 4B c3 D4 = 64-bit WeP key
3 . click “Save” to finish . encryption in the wireless router (or access
point) is now set . each of your computers on your wireless network
will now must be configured with the same security settings .
WARNiNG: if you are using a wireless client to turn on the
security settings in your wireless router (or access point), you will
temporarily lose your wireless connection until you activate security
on your wireless client . Please record the key prior to applying
changes in the wireless router (or access point) . if you don’t
remember the hex key, your client will be locked out of the wireless
router (or access point) .
