F6D4050 V1000_User Manual_08121716030_P75451-A_F6D4050-v3000_N usb ADR_mnl
Page 36 of
6059
To start using security, you must first enable WEP or WPA for your wireless
router (or access point). For Belkin Wireless Routers (or Access Points), these
security features can be configured through the web-based interface. See your
wireless router’s (or access point’s) manual for directions on how to access the
management interface.
IMPORTANT: You must now set all wireless network cards/adapters to
match these settings.
Configuring your Adapter to use Security
At this point, you should already have your wireless router (or access point) set
to use WPA or WEP. In order for you to gain wireless connection, you must set
your Enhanced Wireless USB Adapter to use the same security settings.
Changing the Wireless Security Settings
Your Belkin Enhanced Wireless USB Adapter supports advanced security
technology, including Wi-Fi Protected Access™ 2 (WPA2™), Wired Equivalent
Privacy (WEP), and Wi-Fi Protected Setup™ (WPS), which simplifies the setup
of a wireless network. WPS uses familiar methodologies, such as typed Personal
Identification Number (PIN) entry and push-button network-name configuration.
This automatically enables strong WPA/WPA2 data encryption and
authentication.
Using Wi-Fi Protected Setup
When attempting to connect to a WPS-enabled network, the following screen will
appear:
1. Personal Identification Number (PIN) Method: In this method, your
Enhanced Wireless USB Adapter generates a PIN to be entered into your
router.
