Belkin F5L009 - Network USB Hub, User Manual

Page: 8 / 132

uk-6
Using the Network USB Hub Control Center
1
2
3
4
5
uk-6
What the designations mean
Device:
Name of the device. You can change the name by
clicking “Properties”.
Status: Status of the device. The status changes automatically.
Connected to this computer:
Devices shown are currently
connected to the computer that you are using.
Type:
Category of the device. This is detected automatically.
Automatically connect:
This allows the PC to automatically
connect to this device. This can be enabled or disabled
in “Properties”.
Hub ID:
The ID of the Hub into which the device is plugged.
This is detected automatically.
Not Connected: It is available for you to use. You can
connect to this device by double-clicking the bar or by
clicking “Connect”.
P75465ea_F5L009.indb 6 7/27/2007 3:08:32 PM