Belkin F5D8000 User Manual Download Page 43

Page: 43 / 47

Information

FCC Statement

DECLARATION OF CONFORMITY WITH FCC RULES

FOR ELECTROMAGNETIC COMPATIBILITY

We, Belkin Corporation, of 501 West Walnut Street,

Compton, CA 90220, declare under our sole

responsibility that the product,

F5D8000

to which this declaration relates,

complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) this device

may not cause harmful interference, and (2) this device

must accept any interference received, including

interference that may cause undesired operation.

Caution: Exposure to Radio Frequency Radiation.

The radiated output power of this device is far below the FCC radio frequency

exposure limits. Nevertheless, the device shall be used in such manner that

the potential for human contact during normal operation is minimized.
When connecting an external antenna to the device, the antenna shall be

placed in such a manner to minimize the potential for human contact during

normal operation. In order to avoid the possibility of exceeding the FCC radio

frequency exposure limits, human proximity to the antenna shall not be less

than 20cm (8 inches) during normal operation.

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation.

Summary of Contents for F5D8000
















































Search results

Summary of Contents for F5D8000

Reviews:

Related manuals for F5D8000

Brands by name

Popular brands

Belkin F5D8000, User Manual

Search results

Summary of Contents for F5D8000

Reviews:

Related manuals for F5D8000

Brands by name

Popular brands