Belkin F5D6231-4 - Wireless Cable/DSL Gateway Router, Quick Installation Manual

Page: 19 / 32

C
ONFIGURING
Y
OUR
C
OMPUTER
11
5. Another box will appear asking whether you want to save your TCP/IP settings.
Click “Save.”
Step 2. Disable HTTP Proxy
You will need to verify that the “HTTP Proxy” feature of your Web browser is
disabled. This is so that your Web browser will be able to view the configuration
pages inside your F5D6231-4 Wireless Gateway. The following steps are for Internet
Explorer and for Netscape. Determine which browser you use and follow the
appropriate steps.
Internet Explorer
1. Open Internet Explorer and click the stop button. Click “Edit” and select
“Preferences.”
2. In the Internet Explorer Preferences window, under “Network,” select “Proxies.”
3. Uncheck all checkboxes and click “OK.”
Netscape
1. Open Netscape and click the stop button. Click “Edit” and select “Preferences.”
2. In the “Preferences” dialog box, in the left-hand column labeled “Category,”
select “Advanced.” Under the “Advanced” category, select “Proxies.”
3. Select “Direct Connection to the Internet” and click “OK.”
Step 3. Obtain IP Settings from Your Gateway
Now that you have configured your computer to connect to your F5D6231-4
Wireless Gateway, it needs to obtain new network settings. By releasing any old IP
settings and renewing them with settings from your F5D6231-4 Wireless Gateway,
you will also verify that you have configured your computer correctly.
1. Pull down the Apple Menu. Click “Control Panels” and select “TCP/IP.”
2. In the TCP/IP window, your new settings will be shown. Verify that your IP
address is now 192.168.2.xxx (2~255), your Subnet Mask is 255.255.255.0
and your Default Gateway is 192.168.2.1. These values confirm that your
F5D6231-4 Wireless Gateway is functioning.
3. Close the TCP/IP window.
Now that your computer is configured to connect to your F5D6231-4 Wireless
Gateway, please skip to “Configuring Your Gateway” on the next page.