Belkin F5D6001, User Manual

Page: 13 / 24

Windows XP Users
If you are using Windows XP, please read this section first.
Windows XP integrates a wireless management utility referred to as Windows XP
Wireless Zero Configuration service (WZC). The WZC can be used to control your
Card or you can use the Belkin Wireless Network Monitor Utility. We suggest that
you use the Belkin Utility to control your Card. If you choose to use the WZC,
directions for operation of the WZC are available in the Windows XP help file.
When you first install the Card, the Belkin Utility will be enabled. If you want to
disable the Belkin Utility in order to use the WZC, follow the steps below to
disable the Belkin Utility.
Disabling the Belkin Wireless Network Monitor Utility in Windows XP
1. Right-click on the system tray icon ( ).
2. Select “Use Windows to Configure my Wireless Connection”.
3. The Belkin Utility will disable itself and enable the WZC. This may take up to
30 seconds.
4. To re-enable the Belkin Utility, double-click on the desktop shortcut ( ).
This will disable the WZC and enable the Belkin Utility. This may take up to
30 seconds.
THE BELKIN WIRELESS NETWORK MONITOR UTILITY
11
P743056-D_F5D6001v3kMan8_03.qxd 9/5/03 4:58 PM Page 11