6
Belkin
®
Advanced Secure Windowing KVM User Manual
SECTIONS
oVerVIeW
2
always-on, active anti-tamper system
Active anti-tampering system prevents hardware implants and wireless
key-loggers. Any anti-tampering attempt causes isolation of all
computers and peripheral devices rendering product inoperable and
showing clear indications of tampering event to user.
Holographic security tamper-evident labels are placed on the enclosure
to provide a clear visual indication if product has been opened or
compromised.
Metal enclosure is designed to resist mechanical tampering with all
microcontrollers protected against firmware-read, modification and
rewrite.
Common access Card (CaC)
Belkin Secure Windowing KVM patented CAC Ports enable secure use
of not only CAC or smart-card readers but also biometric readers, face-
recognition and iris-recognition devices. Separate cables used for this
port enable further protection and isolation of this function.
secure Packaging
“Tear away” packaging ensures secure delivery of the product as it is
routed to the end user.
Tamper evident labels
Belkin Secure Switch uses holographic tamper
evident labels to provide visual indications in case
of enclosure intrusion attempt.
If for any reason the tamper evident seal is missing,
appears disrupted, or looks different than the
example shown here, please avoid using product
and call Belkin Technical Support at: (800) 282-2355.
active anti-Tampering system
Belkin Secure Switch is equipped with an always-
on active anti-tampering system. If mechanical
intrusion is detected by this system, the Switch will be permanently
disabled and LED will blink continuously.
If product indication tampered state (all LEDs blinking) - please call
Technical Support and avoid using that product
Product enclosure Warning label
Belkin Secure Switch has the following
warning printed next to the location of the
product Asset Tag and Tamper Evident
labels on product enclosure:
12345678
