16
Belkin
®
Advanced Secure Windowing KVM User Manual
InsTallaTIon
SECTIONS
3
before Installation
unpacking the Product
Before opening the product sealed packaging, inspect the seal
condition to assure that product was not accessed or tampered with
during delivery. If packaging seal looks suspicious, contact the Belkin
support team and do not use the product.
After removing the seal, inspect packaging contents to verify that the
required components are included. See packaging content list on page 2.
After the Belkin Advanced Secure Windowing KVM is removed from its
packaging, inspect the tamper-evident label to assure that the product
is properly sealed. If the label is damaged or missing, contact Belkin
support and do not use the product.
Where to locate the belkin advanced secure Windowing KVM?
The enclosure of the product is designed for desktop or under-the-table
configurations. An optional mount kit is available.
Product must be located in a secure and well-protected environment to
prevent potential attacker access.
Important:
1. If the unit’s enclosure appears disrupted or if all channel-select LEDs
flash continuously, please remove product from service immediately
and contact Belkin Technical Support at
(800) 282-2355
.
2. Do not connect product to computing devices:
a. That are TEMPEST computers;
b. That include telecommunication equipment;
c. That include frame grabber video cards
d. That include special audio processing cards.
