17
Belkin
®
Universal 2nd Gen Secure DP/HDMI to DP/HDMI KVM Switch
InsTallaTIon
seCTIons
Table of Contents
Pre-Configuration
where to place the switch:
The enclosure of the Switch is designed for desktop or rack-mount configuration.
Rack-mount brackets are not included with the Switch.
Consider the following when deciding where to place the switch:
Your proximity to the port selectors on the front of the Switch
The lengths of the cables attached to your keyboard, monitor, and mouse
The location of your computers in relation to your console
The lengths of the cables you use to connect your computers to the Switch
warning:
Avoid placing cables near fluorescent lights, air-conditioning equipment,
or machines that create electrical noise (e.g., vacuum cleaners).
Important:
If the unit’s enclosure appears disrupted or if all channel-select leds flash
continuously, please remove product from service immediately and contact
belkin Technical support at (800) 282-2355.
1.
Do not connect product to computing devices:
a. That are TEMPEST computers;
b. That include telecommunication equipment;
c.
That include frame grabber video cards;
d. That include special audio processing cards.
