CarAudio Connect Aux
EN-4
SECTIONS
1
2
6
5
4
Table of Contents
7
3
DAILY USE
Connecting
1.
Plug the male 3.5mm labeled “TO PHONE” into the 3.5mm
headphone jack of your phone.
Note:
The extension cable is not to be used with your phone.
It can only be used to connect with your car stereo.
2.
Turn on your car stereo and set the input source to AUX.
Managing Phone Calls
Make a call:
• Place calls as you normally do on your phone and the call’s audio will be heard through your
car stereo.
Make a call using voice-dialing:
• If your phone supports voice-dialing, it may be possible to activate it using the CarAudio Connect Aux.
Simply press and hold the button for more than one second, and then release the button. When you
release the button, you will hear your phone prompt for a command.
Answer a call:
•
Tap the button to answer an incoming call.
End a call:
• Tap the button to end an active call.
• On some phones, you may need to HOLD the button to end the call.
