35
UsING YOUR BABY 200
There are 5 volume levels and off (Mute).
The default loudspeaker volume is Level 3.
1. Press
or
to select the required level. You will hear a
difference in volume as you keep pressing the button(s).
If you wish to switch the volume off, keep pressing
until the
Mute LED turns red (Mute All) or press the
button.
If you try and set the volume higher or lower than the 5 settings
available on either unit you will hear an error tone.
Setting the Parent unit volume to Off is the equivalent of switching the Mute
All feature on. See page 17 for more information on Mute All.
Mute All feature – Parent unit only
Adjust the Parent unit loudspeaker volume
The Mute All feature prevents any sound coming out from
the Parent unit loudspeaker. With Mute All on you can
still monitor your baby using the Baby sound level LED
indicators (page 15) and the Crying Alert (below).
1. To switch Mute All on, press the
button located on the
top of the unit. The Mute indicator will illuminate red.
2. To switch Mute All off, press the
button
again.The red Mute indicator will go off.
Crying alert
The crying alert will only be activated if Mute All has been
switched on (or if the Parent unit loudspeaker volume has been
switched off), see above for information on the Mute All feature.
With Mute All switched on, if your baby starts to cry you will not be
able to hear the cries but if the cries sound above a certain level i.e. if
they reach 83dB, which is the 1st red Baby sound level LED, then the
Parent unit will emit an audible beep.
Setting the Parent unit loudspeaker volume to Volume Off is the
equivalent of switching the Mute All feature on.
If the
or buttons are pressed whilst Mute All or Mute Low has been set then Mute All
or Low will be switched off and the loudspeaker volume will return to Level 3 automatically.
