9
GETTING STARTED
Using the WPS Button
1 . Start WPS Push Button Connection (WPS PBC) on your computer or other
Wi-Fi device that you would like to connect wirelessly to your Router . Often
there will be a button for this purpose in software that came with the device,
or a physical “WPS,” “PBC,” or “Security” button on the device itself .
2 . Within two minutes, press the WPS button on
your Router and hold for two seconds .
The WPS light (small light above WPS button) will blink blue while it listens for
your Wi-Fi device . Once a connection is established, the light will turn blue and
then go out . If a connection is not established, the light will blink amber . You
may repeat the process to try again .
You can repeat this process for each WPS-enabled device you’d like to add to
your network .
When finished installing optional software, click “Thanks, take me to
the dashboard .”
Congratulations! You are now at your Router’s dashboard . Your Router
is set up and ready to use .
