BELINEA Belinea 103052, Service Manual

Page: 5 / 72

--3--
Belinea 103052 Technical Service Manual
General Information
1. Description
This Belinea 103052, 17” (15.8" viewable) color display monitor is operated in R, G, B, drive mode
input.
2. Operating instructions
2-1. External instructions
2-2. Front
Power Switch, Menu, Select, Down( ), Up( ), Power LED.
2-3. Rear
Input connection, (AC & SIGNAL CABLE)
2-4. Service Instruction(internal controls)
High-Voltage, Focus
2-5. OSD Controls
Contrast, Brightness, H/V Position, H/V Size, Pincushion, Trapezoid, Parallelogram, Pin Balance,
Corner Top/BTM, H/V Moire, Degauss, Color Control, Recall, OSD H/V Position, H/V Linearty,
Language, Information, Rotation
3. Electrical Characteristics
3-1. 100-240 Volt 60Hz/50Hz for use all over the world.
This power supply is a 90Watt multi output SMPS for monitor.
3-2. Video
Input : 0.7V p-p analog signal (at 75 ohm terminated)
Bandwidth : 205MHz (Max. Dot Rate)
Polarity : Positive
3-3. Horizontal Drive
Level : TTL High : 2.4V min
Low : 0.4V max
Polarity : Negative or Positive
Frequency : 30KHz 97KHz
Timing Limits : Pulse width (0.5µs Thp 5.5µs)
3-4. Vertical Drive
Level : TTL High : 2.4V min
Low : 0.4V max
Polarity : Negative or Positive
Frequency : 50Hz 150Hz
Timing Limits : Pulse width (0.02ms Tvp 0.2ms)
4. Model Description
Tco’03
CRT Type : - SAMSUNG SDI
M41QAQ261X132(T4)