background image

ENGLISH

 

  Belinea 10 19 35 - Operating Instructions - 

7

TROUBLESHOOTING

Blank Screen

Power indicator is off

Make sure the power cable is connected properly (see section “Connecting”).

Make sure that the monitor was turned on using the power switch (see section “Startup”).

Power indicator lights orange 

Perhaps a power saving mode is active? Press any key on your keyboard or move the mouse.

Power indicator lights green

A screen saver may have activated automatically after a certain period of inactivity. Press any key on your keyboard 
or move the mouse.

“No Signal Input” message

Is the signal cable connected to the monitor and the PC’s graphics port (see section “Connecting”)?

Is the PC turned on (see your PC’s documentation)?

Display Problems

Image is displaced to the left/right or to the top/bottom

If the image appears normal but off-center, you can adjust it using the OSD functions. For further information, see 
chapter “Basic Setup”, section “Automatic Image Adjustment” or chapter “OSD Menu Functions”, section “Image”. 

Image flickers or is shaky

-  Perhaps setup fi le chosen for the monitor is incorrect. For information on monitor setup under Windows

®

 95/98/

ME/2000/NT/XP consult the “Confi guration” section.

Image is blurred

-  Check brightness and contrast settings (see chapter “OSD Menu Functions”, sections “Brightness” and “Con-

trast”).

Check the sharpness setting (see “Fine” function in the “OSD Menu Functions” section).

Color problems

If the colors are off (e.g. white is not really displayed as white etc), you should adjust the color temperature (see 
“Color Temperature” function in section “OSD Menu Functions”).

LCD panel

 

19 inch diagonal size (48.3 cm visible), low radiation according to TCO 

99, certifi ed 

to ISO 13406-2, pixel fault class II, TN panel technology 

Contrast ratio 

 

600:1 (typical) / 700:1 (max.)

Viewing angle

 

(Contrast ratio ≥ 10:1) horizontal 140°, vertical 130° (typical)

 

(Contrast ratio ≥ 5:1) horizontal 160°, vertical 150° (typical)               

Response time

 

 8 ms (typical)

Brightness

 250 

cd/m

2  

(typical) / 270 cd/m

(max.) 

Input signal

 

Video: analog (15-pin mini D-Sub) and digital (24-Pin DVI-D) 

Display colors

 

16.2 mill. colors 

Synchronization

 

30–81 kHz horizontal, 56–76 Hz vertical

Video band width

 

135 MHz (pixel rate)

Ergonomic resolution 

1280 × 1024 (60 Hz)

Audio 

Amplifi er: 1 W at 8 Ohms 

 

Loudspeaker: 1 W continuous load, 1 W peak power

Power connection

 

100–240 V AC, 50–60 Hz

Power consumption

 

ON status: max. 50 W (with audio); color of the status LED: green

 

SLEEP status: max. 2 W; color of the status LED: orange

 

Power saving functions EPA certifi ed 

Dimensions / weight

 

Width: 416 mm, height: 417 mm, depth: 216 mm; 6.5 kg (net)

Operating environment

 

Operation: 0 to +40 °C, humidity: 30–80 % (without condensation)

 

Storage: -5 to +45 °C, humidity: 5–90 % (without condensation)

TECHNICAL SPECIFICATIONS

Summary of Contents for 101935













Reviews: