14
- Belinea 10 30 50
ENGLISH
TECHNICAL SPECIFICATIONS
CRT
17 inch diagonal size (40.6 cm visible), 0.26 mm dot pitch,
low radiation according to MPR II and TCO 99,
P22 phosphor (medium short persistence)
Input signal
Video: analog 0.7 V
pp
/ 75 Ohm, positive
Synchronization: separate, TTL-Level
Horizontal synchronization: positive/negative
Vertical synchronization: positive/negative
Display colors
Analog input, unlimited colors
Synchronization
30 95 kHz horizontal
50 160 Hz vertical
Band width
150 MHz
Resolution
max. 1280 x 1024 pixels
Misconvergency
Zone A (Center): max. 0.15 mm (all modes)
Zone B (Main area): max. 0.30 mm (all modes)
Zone C (Corners): max. 0.35 mm (all modes)
Power supply
100 - 240 VAC, 50 - 60 Hz
Power consumption
max. 95 W (Standby: < 15 W, Off-State: < 3 W)
Power saving functions E2000, EPA, NUTEK and VESA-DPMS certified
Dimensions
420 mm (width) x 428 mm (height) x 454 mm (depth)
Weight
18.5 kg (net)
Operating environment
Temperature: 0 ~ 40
°
C
Rel. humidity: 20 to 80% (without condensation)
ENERGY SAVING FUNCTIONS
This monitor is equipped with power management fea-
tures according to the E2000, EPA, NUTEK and VESA
DPMS standards. When not in use, the power consump-
tion is reduced in three steps (Standby, Suspend and Off).
When the power saving features are turned on, this is
indicated by the status indicator.
Most graphics cards and PCs support monitors with
power management features. If you have an older PC or
graphics card that does not support power management
features, please contact your dealer.
Modus
H-Sync
V-Sync
Color of
Power
Recovery
status indicator
consumption
time
Normal
active
active
green
< 95 watts
-
Standby
off
active
yellow
< 15 watts
< 4 sec.
Suspend
active
off
yellow
< 15 watts
< 4 sec.
Off
off
off
orange
< 3 watts
< 20 sec.
Pin
Assignment
1
Red
2
Green
3
Blue
4
Ground
5
Ground
6
Red return
7
Green return
8
Blue return
Pin
Assignment
9
No pin
10
Ground
11
Ground
12
SDA signal
13
Horizontal sync
14
Vertical sync
15
SCL signal
15-pin D-SUB connector
PIN ASSIGNMENT
