Belimo UK24BAC, Technical Data Manual

Page: 13 / 20

UK24BAC Belimo Gateway MP to BACnet MS/TP
www.belimo.com T9-
UK24BAC • en • v1.9 • 06.2018 • Subject to changes
13 / 20
PICS (continued)
Service processing

The device supports DeviceCommunicationControl service. The execution of the service is
password protected (Password: BELIMO).
BACnet object description
Object Name Object Type / Instance Description Values Default
Device_Name Device [x] - -
OFFSET_DEV_ID Analog Value [1] This value plus the parameterized MAC
address (0
…127) define the Device-ID.
0…4'194'056
(2
22
-247)
1000
COV_MODE Multi-state Value [1] Setting of the COV mode
If COV is enable, changed values will be
transmitted as broadcast (local or global).
The property
COV_Increment must be
adjusted accordingly for Analog Input
objects.
OFF
LOCAL
GLOBAL
OFF
NODE_TYPE_[n] Multi-state Value [n*100+0] Actuator type; the allocation may deviate
from the basic category with some actuators.
Note: In the event of a communications
interruption, the Gateway will discard the
affected actuator after 10 seconds and reset
the actuator type to 0. Monitoring of the
actuator is thus accomplished preferably
with this object.
Each MP node has an unambiguous series
number (e.g. 00839-31324-064-008). This
number is show in the property
Description .
NONE
AIR/WATER
GLOBE VALVE
FIRE
VAV/EPIV
MPL
NONE
REL_STPT_[n] Analog Output [n*100+0] Setpoint for actuator setting in %
The default value can be parameterized with
property
Relinquish_Default .
In the case of actuators for fire dampers, the
control must be accomplished through
override control (see OVERRIDE).
0…100
0
OVERRIDE_[n] Multi-state Value [n*100+1] Overriding the setpoint with defined values
The default value can be parameterized with
property
Relinquish_Default .
For fire dampers:
Due to safety considerations, the only
override values permitted in the case of
actuators for fire dampers are OPEN and
CLOSE.
The operating position (OPEN) must also be
repeated within 120 seconds. If the override
command is not renewed, then the Gateway
will move the actuator into safety position
(
Relinquish_Default is not writable).
NONE
OPEN
CLOSE
MIN/VMIN
MID/VMID
MAX/VMAX
NONE